MaxiDrill Solo LD

Introduction

Designed for low disturbance to prevent grassweed germination

The MaxiDrill Solo LD is a new configuration of Sky trailed drill designed specifically to cater to the needs of farmers in problem grass weed areas. This drill utilises the same disc as the no-till EasyDrill but with a slightly slimmed down skim coulter to reduce soil disturbance to a minimum. Disc angles of 4.5 degrees to the direction of travel and 0 degrees to the vertical ensure no soil burst and that the seedbed is opened just enough to place the seed. Individual coulter pressure of up to 120kg’s allows the Solo LD to be used as a direct drill on lighter soils and ensures penetration in the more typical min-till systems. The press wheels effectively close the slot without any further soil movement ensuring perfect seed placement and covering.

MaxiDrill Solo 

MaxiDrill Solo LD Features

Cat III crossbar lower link mounting

Easy to hitch, allows tight turns in transport and in the field.

Transport wheels

The MaxiDrill Solo LD is designed with a dedicated transport axle. This allows it to be fitted with hydraulic or air brakes and means the drill is safe and legal for high-speed road transport. When using the MaxiDrill Solo LD on a farm spread over many miles this can be a great benefit to productivity as well as providing peace of mind for the operator and owner. As the drill is fitted with the road axle and two large tyres there is no problem with the camber on the road affecting steering or overloading the central wheels of a full-width press roller used for transport. High clearance for transport due to the transport axle and two folding sections.

Disc coulters

 

  • Two rows of identical leaf spring mounted coulters provide up to 120kg per coulter for consistent penetration and seeding depth even in tough conditions. This enables the drill to work as a direct drill in certain conditions as well as a mintill drill.
  • The large 56cm clearance between the two rows of coulters ensures unrivalled residue flow. This is ever more important in wetter soils with higher levels of trash.
  • 415mm discs – one of the largest on the market which enables the drill to cope with high levels of crop residue.
  • Rubber mounted tungsten carbide tipped skim coulter – cleans the seed slot out before the seed is placed and keeps the disc and scrapes the disc to keep it clean. The tungsten tip ensures longevity whilst the rubber mount keeps the coulter pressurised against the disc without the need for adjustment.
  • Individual press wheels – control depth and consolidate to provide soil to seed contact dry conditions.
  • Depressuriser – vents the air pressure used to convey the seeds from the hopper and allows them to drop under their own weight into the soil, reducing bounce, and the risk of uneven seed depth.
Adjustable following harrow

Levels the soil and leaves some loose particles on the surface to prevent capping.

Seed hopper

A large easily accessible hopper with roll-over hopper cover.

  • Sky’s simple clever ideas that make a difference to everyday usage.
  • Easy emptying due to the emptying shutter and split folding design of the machine.

Metering mechanism

 

  • Steps and open design provide easy access to the metering mechanism to adjust and calibrate the machine.
  • Single roller metering mechanism with adjustable opening and gearing means no spare seed rollers need to be carried with the drill. The seed rate can be adjusted from 0.5 to 450kg/ha.
  • Electric driven metering system allows easy calibration, accurate setting and variable rate as standard.
  • "Push Button Calibration" makes the drill very simple to set up accurately.
  • Forward speed reading provided by the radar or optional GPS sensor.
  • RDS Pilot or Duo Vision controllers allow the operator full control of the seed (and fertiliser) metering from the cab and the Duo Vision system can be integrated with mapping systems to vary seed and fertiliser rates.
  • Electronic pre-load facility for starting drilling ensures the seed is metered at full rate from the start of the drilling run.
  • Seed Head – seed is distributed by the ADS head which accurately delivers the correct amount of seed down each outlet.
  • Its unique row management system allows individual rows to be manually selected and then electronically engaged and disengaged. Every other or any number of  rows can be shut off allowing wider row spacing with one seed or rows to be planted with alternating seed types. Tramlines are selected in the same way and as a result spacing of row shut-off's are easy to alter from field to field if necessary.
  • Accuracy – the Sky metering mechanism and ADS head provide unrivalled accuracy when drilling small or large seeds. This was tested by the German Agricultural Research Institute and given an excellent rating for both small and large seed types.

 

 

 

Pro Hopper

The Pro Hopper is an additional small seed hopper that can be mounted on the MaxiDrill to apply slug pellets, micro-fertilisers or small seeds at the same time that the drill is seeding. Effectively this allows a fertiliser equipped MaxiDrill to seed three products in one pass, with all three of the seed hoppers being controlled by the one RDS Vision controller. The product metered by the Pro Hopper has to be introduced into either the seed or fertiliser distribution systems so it is drilled with one product or the other.

Models

6m MaxiDrill Solo LD 6000 & Pro

6m MaxiDrill Solo LD: includes Pilot display, single hopper, pneumatic distribution, half width shut off and air brakes.

6m MaxiDrill Solo LD Pro: includes Vision Duo display, Pro Hopper, single hopper, pneumatic distribution, half width shut off and air brakes (see "PRO Hopper" in features section above).

Power required: 120-200 hp, soil without stones: 8 to 20 km/h, soil with stones: 8 to 12 km/h.

8m MaxiDrill Solo LD 8000

8m MaxiDrill Solo LD: includes Pilot display, single hopper, pneumatic distribution, half width shut off and air brakes.

Power required: 120-250 hp, soil without stones: 8 to 20 km/h, soil with stones: 8 to 12 km/h.

9m MaxiDrill Solo LD 9000

9m MaxiDrill Solo LD: includes Pilot display, single hopper, pneumatic distribution, half width shut off and air brakes.

Power required: 120-250 hp, soil without stones: 8 to 20 km/h, soil with stones: 8 to 12 km/h.

Technical Specification

6m MaxiDrill Solo LD 6000

8m MaxiDrill Solo LD 8000

9m MaxiDrill Solo LD 9000

Options and Accessories

MaxiDrill Solo LD optional extras

Rear Central Press  - recommended on well-worked seedbeds, essential on ploughed ground.

Lateral Press - Recommended on ploughed ground for even consolidation across the working width.

Press Wheel Scrapers.

Pair of Eradicator Tines.

Work Lights - Long life LED lights.

Pre-emergence Markers.

Independent Hydraulic Tank with Pump – For PTO drive of the fan.

Additional No Ridge Harrow behind the Staggered Roller – For use on very light soils.

Additional 1+1 Tramline Closing Valves.

Pricing

October 2017 Price List

 

To download the October 2017 Sky product price list click the image above

 

To download and view our Product Price List you will need the free Adobe Reader
If you don't already have this Click Here to download the Adobe Reader

Downloads

Would you like some more information?